Position 0 = 11.5v (no engine running) Position 1 = 9.2v. Position 2 = 7.1v. Position 3 = 5.1v. Position 4 = 3.4v. Still the headlights don't adjust when turning the knob inside the car, i have repositioned the pins inside the headlight plug to match the plug on the car. Still nothing, everything else works a treat. Adjust the vertical bolt, located on the top of the headlight assembly near the center of the vehicle to raise or lower the headlight, using a crosspoint screwdriver. Turn the screw counterclockwise to lower the headlamp beam; turn the screw clockwise to raise the headlamp beam. Adjust the headlamp so that the beam is below a driver's eye level. Ford F150 09-13 Projector Headlights Installation Guide; Ford F150 97-03 / Expedition 97-02 1PC Projector Headlights Installation Guide; Ford F250/350/450 Super Duty 05-07 Projector Headlights Installation Guide; Ford F250/350/450 Super Duty 11-13 Projector Headlights Installation Guide; Ford Focus 12-13 Projector Headlights Installation Guide Yes, new headlights can be expensive from Ford, especially if yours are xenon/HID. Plenty of people have bought aftermarket because of that. You can try dielectric grease on the metal connections, if there is looseness in some connection, it can help keep things from moving around as well as keep moisture out (if you live somewhere wet.) More This is why you get the fault and the power is cut. Your low beams just shut off. The fix is to buy an ELM 327 and then use FoCCCus (what I used) or ForScan. You change the headlight setting to HID alternative and you change the low beam fault to off. The fault will still come on but the lights will work. The Focus doesn't have a seperate adjustment for high and low beam - just 2 screws, up and down and left and right which adjusts both low and high beam at the same time. As for the lights being from a left hand drive model rather than a right hand drive model, is not the case. Be cool under pressure. Your coolant should perform well under any condition - just like Aaron Rodgers! 2009 Ford Focus SE 2.0L 4 Cyl. Sedan (4 Door) How to add transmission fluid. If your transmission is running low on fluid, be sure to add some - find out how to do this here! 2009 Ford Focus SE 2.0L 4 Cyl. Sedan (4 Door) Top up the oil level. The right bulb size for low beam headlights on all Ford Fusion model years (2006-2020) is H11. High Beam Headlights. Ford Fusion used H7 lightbulbs for its high beam headlights from 2006 to 2018. In 2019, Ford changed the size of high beam headlight bulbs to H9. The Ford Fusion 2020 model also uses H9 lightbulbs on its high beam headlights bFPKOV4.

ford focus headlight adjustment not working